Hade Gumi DIY candy kit — English instructions, step by step

Hade Gumi: English Instructions, Step by Step

Hade Gumi is the kit where the interesting part happens without you. You make the ramune layer, pour the gummy base on top, and then you shake the cup — and the gummy assembles itself around the ramune. Four pieces come out of one pack, and each one has three textures in a single bite.

The short version: No microwave, no shaping, no precision. Ramune first, gummy base over it, shake. One of the best kits to give a younger child on their own.

What You're Making

Layer

Chewy Gummy

The body of the sweet. It sets around everything else while you shake.

Layer

Crunchy Ramune

Made first, in the bottom of the cup. This is the texture contrast that makes the kit worth doing.

Finish

Crisp Sprinkles

Scattered through the mix, so the crunch is not all in one place.

Flavour

Fruit and Soda

Two flavour directions in one pack. If soda flavour surprises you, there is a reason for that.

Why This Is the Easiest Kit We Sell

There is no heat step, no moulding, no piping and no assembly. The only physical skill involved is shaking a cup, and the kit is designed so that the shaking is what does the work.

That makes it the one we point people to when they ask what to give a five- or six-year-old to do by themselves. Our age guide goes into which skills each kit actually needs; Hade Gumi sits at the bottom of that list, in a good way.

Where it still goes wrong

  • Pouring the gummy base too early. The ramune layer needs a moment to firm up first. Pour immediately and the layers merge into one texture.
  • Not shaking enough. It feels like too much. It usually isn't. The gummy needs the movement to coat properly.
  • Shaking with the lid loose. Self-explanatory, and worth checking before you hand the cup to a child.

How to Make It

One thing to know We don't reprint the exact water quantities here, and you shouldn't trust any site that does. Every kit prints its own measurements on the tray or the back of the box, they differ between kits, and Kracie changes them between production runs. Use the diagram on your box for the numbers. What this guide gives you is everything the diagram doesn't: what the pictures mean, what order to work in, and where it goes wrong.

  1. Open the pack and identify the two powders

    One is the ramune, one is the gummy base. They look similar. The box diagram shows which is which — check before you add water.

  2. Make the ramune layer in the cup

    Mix it in the base of the cup and give it a moment to firm. This is the layer that provides the crunch, so it needs to hold together.

  3. Pour the gummy base over the top

    Add water to the gummy powder as the diagram shows, then pour it over the ramune. Getting the water right matters more than anything else here.

  4. Shake

    Lid on, and shake properly. This is the step doing the actual work, and under-shaking is the most common reason a batch comes out uneven.

  5. Wait, then tip out four pieces

    Give it the setting time on the box before you open it. One pack makes four.

If It Came Out as One Blob

A single soft mass instead of four pieces means the gummy went in before the ramune was ready, or there was too much water in the gummy base. Both are fixable next time and neither makes it inedible.

If you're new to Japanese DIY candy generally, Nerunerunerune is the other kit in this bracket, and this explains why all of these arrive as powder.

Posted from Tokyo Every kit we send is the Japanese retail product, with Japanese packaging. That is why we write these guides — the instructions in the box are diagrams plus Japanese text, and the diagrams only get you so far.

If you like gummy kits that make themselves, Gumi Tsureta works the same way — except the result depends entirely on how slowly you lift.

Get Hade Gumi, posted from Tokyo →
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.